http://www.hard-reset.in/android-boot-cable.html
Before you give your handset to repair shop or buy new handset, please try the following procedure to repair your device. First charge your battery more then 70%, backup your important data like phone-book, message, email, images and settings and in most cases take out SIM card and SD card. After doing hard reset not possible to recover your data, so online backup is always important. For all of your data, a backup should be done on a external device, hard drive, raid system media or SD card.
Android Boot Combo Cable
Here is a picture of Android mobiles Combo Boot Cable
Use of android mobile combo boot cable:
- MTK Android Read Flash
- MTK Android Write Flash
- MTK Android Format
- MTK Android Repair IMEI No.
- MTK Android Unlock
- SPD Android Read Flash
- SPD Android Write Flash
- SPD Android Format
- SPD Android Repair IMEI No.
- SPD Android Unlock
- MSTAR CPU Read Flash
- MSTAR CPU Write Flash
Make Normal USB Cable to Boot Cable
I give you a simple method to make a boot cable for flashing, firmware updating of android and normal handset.
with this cable you can read flash, write flash, format, unlock and repair Imei without any box, with original factory flasher, flash file and tools.
Open USB cable and Joint "4th" Empty Point to "5th" GND Point and now your cable ready for work on all model.
you can make both convector type cable. like normal CA101 Cable and V3 Cable.
This cable work on all android, MTK, SPD, MSTAR CPU, no need to press any boot key.
you can use this cable on all android and normal handset.
Note: after make cable please test with multimeter. if you joint wrong pin then you get damage you handset. so carefully make this cable.
we don't take any responsibility of damage of your handset during making and use of this cable. we are providing you only solutions.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น